Latest Products http://www.tsventerprises.com Latest Products 16-09-28 en-us http://www.tsventerprises.com Capacitor Control Panel http://www.tsventerprises.com/capacitor-control-panel.htm Mon, 26 Sep 2016 00:00:00 +0530 TSV Enterprises are the leader in manufacturing of Capacitor Control Panel, which are provided for controlling the power factor of the complete installation. The front ccp houses fully compartmentalized feeders for controlling individual capacitors, where as rear side of the tc type ccp houses capacitors in well ventilated panel area. Capacitor Control Panel, we manufacture are of high quality and are made up of best raw material. We hold an international market value when it comes to the Capacitor Control Panel we supply. Dbs Busbar System http://www.tsventerprises.com/dbs-busbar-system.htm Mon, 26 Sep 2016 00:00:00 +0530 TSV Enterprises holds specialization when it comes to the manufacturing of finest Dbs Busbar System. Our Dbs Busbar System can be used with single phase or three phase busbar as 4/6/8/12 way db. Three phase busbar can also be used for applications such as One row for powerOne row for lighting We also provide four separate sections; each having three phase distributors for various sections of the house is also possible. Our Dbs Busbar is available with double door and double door can also be replace existing cover at site. Porcelain Fuse Holder http://www.tsventerprises.com/porcelain-fuse-holder.htm Mon, 26 Sep 2016 00:00:00 +0530 Porcelain Base Fuse Holder manufactured by TSV Enterprises is considered best in International market. The fuse Holders are manufacture from Porcelain. These are noninflammable, Non-hugroscopic and with good finish. Contacts Current carrying parts of the holders are made for precisely pressed copper/brass material and have extruded brass base ensure perfect alignment. Back up pressure clips have been precisely formed from Phosphor Bronze/Spring Steel material to ensure perfect mating of male and female parts, for long life. Terminals Adequate, full rated Copper/Brass terminals to suit direct cable termination in case of enclosed type Fuse. Holders and through Cable lugs for open type Fuse Carriers and are supplied complete with Cable holding fasteners. Silver plated contacts are the current carrying parts are heavily electroplated with silver to ensure long life, non-deteriorating contact surface for high efficiency mating. Wall Mount Enclosures http://www.tsventerprises.com/wall-mount-enclosures.htm Mon, 26 Sep 2016 00:00:00 +0530 TSV Enterprises is considered valuable market name for supplying Wall Mounting Enclosures which comes in Type ch in cast iron enclosures. 63 to 315a, 415 vac and type chd in sheet steel enclosures. 400to800a, 415 vac with 3 pole & 4 pole versions refis 13947-3-1993.These swith / switch fuse units are in sheet steel enclosures and available in type lp type wms 32 a 63 a, 415 vac, tp & n. 20a32a&63a, 415vac. Tp&n. These are use as sm fuse holders and can as are use safe clip fuse holders. The units have sude operating handles and front operating handles. This is on ac 23 category of duty. Isolator version is also available. Aluminum Lugs http://www.tsventerprises.com/aluminum-lugs.htm Mon, 26 Sep 2016 00:00:00 +0530 We are reckoned as one of the prominent Tubular Aluminum Lugs Manufacturers in India. The materials we used in the manufacturing of the Aluminum Lugs ensure high durability, tensile strength and high conductivity. The unmatched quality and unsurpassable performance has attracted various industrial sectors to place repeated orders for the Aluminum Ground Lugs. Aluminum Lugs. Additionally, customers are eased with the availability of the Copper Aluminum Lugs in sizes mentioned as per the IS Specifications. Feeder Pillars http://www.tsventerprises.com/feeder-pillars.htm Mon, 26 Sep 2016 00:00:00 +0530 We are the leading Manufacturer, Supplier and Service Provider of electrical Power Product Feeder Pillars. We are feeling privileged to introduce you to our new range of products which are made from the high quality raw material. The good quality of products is the prime reason behind our success. We not only deliver you products at the right time but also provide you with our transformation maintenance and service repairing services. We are offering you products in best packaging. HT Feeder Pillars http://www.tsventerprises.com/ht-feeder-pillars.htm Mon, 26 Sep 2016 00:00:00 +0530 We are the renowned Manufacturer, Supplier and Exporter of Electrical Power Product HT Feeder Pillars. We provide latest technology HT Feeder Pillars. We design our products in such a way that they can provide high safety and protection. Due to its good features 22 k. v. H. T. distribution pillar 400 AMP suitable for 3 phase 50 HZ22 KV ac systems. HT Feeder Pillars are provided by us with embossed name plate, lot no & date of manufacturing as per requirement of buyer. 4 Way H.T. Feeder Pillar http://www.tsventerprises.com/4-way-h-t-feeder-pillar.htm Mon, 26 Sep 2016 00:00:00 +0530 4 Way H.T. Feeder Pillar manufactured by TSV Enterprises provide higher safety, reliability and protection with due consideration of aesthetic. Way H.T. Feeder Pillar, we manufacture are suitable for 3 phase 50 hz 11 kv ac system and are made of finest quality of sheet steel of 3 mm thickness, water proof dust & vermin proof with adequately ventilated. Their main body frame made of 50x50x5 angle to give solid strength to feeder pillar & frame base made with 65x65x5 angle which under goes spray painting & oven baking after seven tank process for better finish and long life of painting and also through heavy duty hinges with brass insert to give smooth operation of door & safety from corrosion. A 3 mm thick Bakelite sheet lining is provided on inner side of body for protection of high current. An electrolytic grade copper bus bar of 50x6mm is provided to take designed current inserted with heat shrinkable sleeves for safe operation. We also provide two nos of copper earthing terminals to facilitating better earthing of pillar and detachable type bottom gland plate, with door for safety purpose. We also embossed name plate, lot no & date of manufacturing provided as per requirement of buyer. 22 KV HT Feeder Pillar http://www.tsventerprises.com/22-kv-ht-feeder-pillar.htm Mon, 26 Sep 2016 00:00:00 +0530 TSV Enterprises provide reliable and protected 22 KV HT Feeder Pillar with due consideration of aesthetic which are suitable for 3 phase 50 hz 22 kv ac system. Our 22 KV HT Feeder Pillar is made up of finest quality of sheet steel of 3 mm thickness and under goes water proof dust & vermin proof with adequately ventilated. Main body frame we made are of 50 x 50 x 5 angle to give solid strength to feeder pillar & frame base made are with 65x65x5 angle.. Spray painting & oven baking is given after seven tank process for better finish and long life of painting. A brass insert to give smooth operation of door & safety from corrosion and 6 mm thick Bakelite sheet lining provided on inner side of body for protection of high current. An electrolytic grade copper bus bar of 50x6(double) provided to take designed current inserted with heat shrinkable sleeves for safe operation. We also deals in embossed name plate lot no & date of manufacturing provided as per requirement of buyer. L T Feeder Pillar http://www.tsventerprises.com/l-t-feeder-pillar.htm Mon, 26 Sep 2016 00:00:00 +0530 TSV Enterprises as a leading manufacturer and supplier of Feeder Pillar, provide safety and protection with due consideration of aesthetic. Our Feeder Pillar are made from finest quality of sheet steel of 14 swg, which further goes under dust water, & vermin proof with adequately ventilated. The bottom pedestal of pillar provided with 50x50x6 m. S. Angles to give solid strength to the pillar boxes. It further undergoes spray painting and oven backing after seven tank process for better finish and long life of painting. These are made up of heavy duty hinges with brass insert to give smooth operation of door & safety from corrosion and 6 mm thick asbestos sheet lining provided in inner side of door and inside the pillar compartment, and separation between cable connection and incoming for protection of current. An electrolytic grade copper bus bar of 40x5mm size to carry designed current inserted with heat shrinkable sleeves for safe operation and E.S. GRADE Aluminum bus bar of 50*10mm size to carry designed current inserted with heat shrinkable sleeves for safe operation also we provide 2 nos of earthing terminals to facilitate better earthing of pillar boxes. We manufacture embossed name plate, lot no & date of manufacturing provided as per requirement of buyer. 4 Way L T Feeder Pillar http://www.tsventerprises.com/4-way-l-t-feeder-pillar.htm Mon, 26 Sep 2016 00:00:00 +0530 We offer highly efficient 4 Way L T Feeder Pillar meticulously designed to provide higher safety, reliability and protection with due consideration of aesthetic features. It is an outdoor type 4way l. T. distribution pillar with 500 amps suitable for 3 phase 50 hz. 440v AC system. The Pillar is made of finest quality steel sheet of 14 SWG which is vermin proof and adequately ventilated. LT ACB Feeder Pillar http://www.tsventerprises.com/lt-acb-feeder-pillar.htm Mon, 26 Sep 2016 00:00:00 +0530 We bring forth high quality LT ACB Feeder Pillar that is designed for providing higher safety, protection with reliability. It is an outdoor type 6 way l. T. distribution pillar with 800 amps suitable for 3 phase 50 hz. 440v AC system. We use the finest quality steel sheet of 14 swg and dust water which is vermin proof with well ventilated.